MAILTO(1)
NAME
mailto - Simple mutlimedia mail sending program
SYNOPSIS
mailto [-a] [-c] [-s] [recipient name(s)]
DESCRIPTION
The mailto program is a very simple user interface for
sending multimedia mail in MIME format, the proposed stan-
dard format for multimedia Internet mail. It is modelled
very heavily on the Berkeley "mail" program. However it
shares NO code with that program -- it is a completely new
implementation.
As its name implies, mailto is for sending mail, not for
reading it. None of the mail-reading features of the
Berkeley mail program have been implemented in mailto.
Users who are already familiar with using the Berkeley
mail command to send mail should skip the following sec-
tion, which explains things that are already familiar to
you from that program. Subsequent sections focus on the
enhanced features that make this program different than
Berkeley mail, notably the ability to include rich text,
multimedia objects, and text in non-ASCII languages such
as Hebrew or Russian.
BASIC USE
[THIS SECTION MAY BE SAFELY SKIPPED BY READERS ALREADY
FAMILIAR WITH THE BERKELEY MAIL PROGRAM.]
The basic operation of mailto is very simple. If you just
type "mailto" you will be asked for a list of mail recipi-
ents ("To:") a mail subject ("Subject:") and possibly a
list of people to receive a carbon copy of your message
("CC:"). Alternately, you can specify all of these things
on the command line. The "-s" option be used to specify
the subject, and the "-c" option can be used to specify
the carbon copy address. All other command line arguments
are added to the To list. Thus the following command
sends mail to nsb and jxr, with a subject of "Test mes-
sage" and a carbon copy to kraut:
mailto nsb jxr -s "Test message" -c kraut
For the convenience of users accustomed to mail readers in
which names are separated by commas, you may optionally
follow each address with a comma, but this is not
required.
After these preliminaries are taken care of, you just type
in the contents of your message. Everything you type will
be included in your message UNLESS you type a line that
begins with the "~" (tilde) character. Such a line is
known as a TILDE ESCAPE, and can be used to give special
commands to the mailto program, as will be discussed
shortly.
When you are done composing your message, you can cause it
to be sent to the intended recipients by simply typing the
end-of-file character, typically CONTROL-D. Depending on
your option settings, you may also be able to send the
mail by typing "." alone on a line, or by typing "~.".
That's all that you really need to know in order to send
mail with mailto. However, in order to use it to its
fullest, you will also want to learn about some of the
tilde escapes. In this section, we describe the most
basic ones, which the mailto program shares in common with
the Berkeley mail program. In subsequent sections, we
will describe the more interesting tilde escapes which are
unique to mailto.
If anything in this section seems cryptic, it might be
helpful to consult the man page for the mail(1) program,
since the user interfaces are very similar.
Any line that starts with a tilde is a tilde escape. The
second character on the line -- the one that follows the
tilde -- is then interpreted as a special command to the
mailto program. The simple tilde escapes that mailto and
mail have in common are as follows:
~? Show help on tilde escapes
~! Shell escape (e.g. "~! ls")
~~ Enter text line starting with a tilde. The tilde
"quotes" itself, allowing you to input a line of
text that starts with a tilde.
~. Send the mail and exit
~c Add to CC list (e.g. "~c nsb")
~d Read in the contents of "~/dead.letter"
(or a named file, "~d filename")
~e Edit the message being composed using the
editor named by the EDITOR environment variable.
~h Edit the To, Subject, and CC headers
~p Print out the message so far
~q Quit, copying the draft to ~/dead.letter
~r Read the named text file into the message
~s Reset the subject header
~t Add to the To list
~v Edit the message being composed using the
editor named by the VISUAL environment variable
~w Write the message being composed to a named file
(e.g. "~w filename")
You can also control the behavior of the mailto program to
a limited extent by putting commands in a file in your
home directory called ".mailrc". These commands include
the ability to define aliases for commonly used mail
addresses. See the section entitled "SUMMARY OF MAILRC
FUNCTIONALITY" later in this man page.
ENHANCED FEATURES NOT FOUND IN BERKELEY MAIL
The main difference between mail and mailto is that the
latter can be used to generate enhanced mail in MIME for-
mat, the proposed standard format for Internet multimedia
mail. However, mailto is intended to be a very simple
multimedia mail generator. There are, accordingly, lots
of things it can't do. However, it has the virtues of
being extremely simple, extremely similar to a well-known
program (mail), and highly configurable, using the "mail-
cap" file mechanism to be described below.
Basically, mailto can include the following things in
mail:
1. Simple formatted text, using the MIME type "text/rich-
text". This allows you to add emphasis to your message
using underlining, bold text, italic (diaplsyed as reverse
video), centering, and the like.
2. Non-text data. Metamail can include pictures, sounds,
and other non-textual data in the middle of any mail mes-
sage. The mailcap configuration mechanism can even make
this process reasonably user-friendly, but a knowledgable
user can include non-textual data even in the absence of a
proper mailcap entry.
3. Text including non-ASCII characters, such as Hebrew or
Russian. Currently, mailto directly supports only the
ISO-8859-* family of character sets, which means that it
does not meet the needs of Asian users, in particular.
However, languages that can not be expressed in the
ISO-8859 family can still be included in the same way non-
text data can be included.
These three mechanisms will be discussed separately in the
three sections that follow.
ENRICHED TEXT
Mailto lets you modify the formatting of your text in a
few simple but useful ways. As with everything else, this
can be done using simple tilde escapes, as described by
the following list:
~b Toggle bold mode (turn bold on or off)
~i Toggle italic mode (turn italic/reverse-video on or
off)
~j Alter Justification, in particular:
~jc Center subsequent text
~jl Make subsequent text flush-left
~jr Make subsequent text flush-right
~k Toggles whether or not a "blind" copy of the mes-
sage will be kept.
~n Force newline (hard line break)
~u Toggle underline mode (turn underline on or off)
~> Indent Left Margin
~< Unindent Left Margin
~<R Indent Right Margin
~>R Unindent Right Margin
~Q Toggle quotation (excerpt) mode
~z Add the contents of ~/.signature as a TEXT signa-
ture
Some of these may require a little explanation. Bold,
italic, and underline modes are toggles in the sense that
alternate uses of ~b, ~i, and ~u turn bold, italic, or
underline mode on or off. The justification, on the other
hand, simply switches between the three justification
modes, centering, left justified, and right justified.
To understand the "~n" command, it must first be noted
that rich text is automatically justified, so that the
line breaks you type have no more significance than space
characters. This allows the text to be displayed more
nicely on variable-width windows. (An exception is when
you type multiple blank lines, in which case the line
breaks become real.) The "~n" command may be used to foce
a line break. Remember that you can see what your mail
looks like at any time using the "~p" command.
Quotation mode, as toggled by "~Q", is useful for format-
ting excerpts. If, for example, you turn on quotation
mode, insert a file, and then turn off quotation mode, the
contents of the file will be considered an excerpt. Most
viewers will show excerpts as indented and/or preceded
with "> " to set them apart from the rest of the text.
Finally, "~z" simply includes your text signature file,
but formats it as a "signature", which many richtext view-
ers will display in a smaller font or otherwise set it off
from the rest of your message.
MULTIMEDIA OBJECT INCLUSION
The basic command for inserting multimedia objects in a
mailto message is "~*". When you type this command, you
will be give a list of options that will vary depending on
your configuration. (How to configure this list will be
described below.) For example, it might look something
like this:
Please choose which kind of data you wish to insert:
0: A raw file, possibly binary, of no particular data
type.
1: Raw data from a file, with you specifying the content-
type by hand.
1: An audio clip
2: Data in 'application/andrew-inset' format
3: An X11 window image dump
4: An interactive mail-based survey
Of these options, only the first two, options 0 and 1,
will appear at all sites and in all configurations.
If you choose options 0 or 1, you will be asked for the
name of a file containing data you wish to include. (If
you enter something that starts with "|", you are includ-
ing the output of a command rather than the contents of a
file.) If you choose option 1, you will also be asked for
the correct "content-type" name that describes that type
of data. The content-type values are defined by the MIME
standard, and are typically type/subtype pairs that
describe the general data type and its specific format.
For example, a picture in GIF format has a content-type of
"image/gif", and an audio clip in basic u-law format has a
content-type of "audio/basic". For option 0, the type
"application/octet-stream" will be used. For complete
documentation on the content-type field, consult the MIME
proposed standard, RFC 1341.
More commonly, however, at a well-configured site you will
not need to know anything about content-types, because
you will choose one of the non-zero options. In these
cases, a program will run that will allow you to compose
data of the given type. The user interface to this pro-
cess cannot be described here, because it will necessarily
be site-dependent, but such programs are generally
designed to be easy for novice users.
An extra mailto command that is useful for including mul-
timedia objects is the "~Z" command. This can be used to
include a multimedia signature file. The signature file
should be a complete MIME-format file, with a Content-type
header field at the top.
CONFIGURATION VIA MAILCAP FILES
NOTE: This section is intended for those who are inter-
ested in extending the behavior of mailto to easily
include new types of mail. Users at well-administered
sites are unlikely to need to do this very often, as the
site administrator will have done it for you.
For a more complete explanation of the mailcap mechanism,
consult the man page for metamail(1). Here we summarize
only those aspects of mailcap files that are relevant to
configuring the mailto program.
First of all, mailto uses a search path to find the mail-
cap file(s) to consult. Unlike many path searches, mailto
will always read all the mailcap files on its path. That
is, it will keep reading mailcap files until it runs out
of them, collecting mailcap entries. The default search
path is equivalent to
$HOME/.mailcap:/etc/mailcap:/usr/etc/mail-
cap:/usr/local/etc/mailcap
It can be overridden by setting the MAILCAPS environment
variable. Note: mailto does not actually interpret envi-
ronment variables such as $HOME or the "~" syntax in this
path search.
The syntax of a mailcap file is quite simple, at least
compared to termcap files. Any line that starts with "#"
is a comment. Blank lines are ignored. Otherwise, each
line defines a single mailcap entry for a single content
type. Long lines may be continued by ending them with a
backslash character, \.
Each individual mailcap entry consists of a content-type
specification, a command to be executed on reading, typi-
cally by the metamail(1) program, and (possibly) a set of
optional "flag" values. The mailto program is only inter-
ested in mailcap entries that have either or both of the
optional "compose" or "composetyped" or "edit" flags. The
compose flag is used to tell mailto about a program that
can be used to compose data in the given format, while the
edit flag can be used to tell mailto how to edit data in
the given format. Thus, for example the following mailcap
entry describes how to compose and edit audio data:
audio/basic; showaudio %s; compose=audiocompose %s;
edit=audiocompose %s; description="An audio clip"
The "composetyped" flag is just like compose, except that
its output is assumed to be in MIME format, including at
least a content-type and also, if necessary, a content-
transfer-encoding header field. Composetyped is necessary
if variable information needs to be conveyed via parame-
ters in the content-type field.
The optional "description" field is used in composing the
prompt that mailto prints in response to the "~*" command.
The compose program is used to compose data in this for-
mat, and the edit program is used to edit data in this
format. In each of these, any occurrence of "%s" will be
replaced by the name of the file to be composed or edited.
If there is no "%s" in the compose command, it is equiva-
lent to having "> %s" appended to the end of the compose
command.
Note that the order in which things appear in mailcap
files is highly critical. The metamail program uses the
first matching mailcap entry to display data. Mailto, on
the other hand, offers the user an alternative for every
mailcap entry that has a "compose" command. However, it
should be noted that mailto will use the content-type from
the mailcap entry in composing content-type headers.
Therefore, compose and edit commands should NOT be speci-
fied on wildcard mailcap entries. If you have a program
can display lots of different subtypes, you should proba-
bly make a separate entry for displaying and for composing
the basic types, e.g.:
image/*; showpicture %s
image/gif; showpicture %s; compose="xwd -frame | xwdtoppm
| ppmtogif"; description="An X11 window image dump in GIF
format"
image/x-xwd; showpicture %s; compose="xwd -frame";
description="An X11 window image dump in XWD format"
For more information on the mailcap file format and syn-
tax, see the metamail(1) man entry.
TEXT IN NON-ASCII LANGUAGES
Mailto provides rudimentary support for the composition of
mail in non-ASCII character sets. Currently, it supports
the ISO-8859 family of character sets. These character
sets all have the nice property that they are proper
supersets of ASCII. That is, all ASCII characters are
identical in all of the ISO-8859 character sets. When you
use one of these character sets, then, you can still type
all ASCII characters as normal.
By default, however, mailto assumes that you are using the
US-ASCII character set, and will not allow the inclusion
of non-ASCII characters. To tell mailto that you are
using a terminal or terminal window that supports one of
the ISO-8859 character sets, you can use the -a switch or
the MM_CHARSET environment variable. For example, typing
"mailto -a ISO-8859-8" tells mailto that your terminal
understands ISO-8859-8, the ASCII+Hebrew character set.
This is what you would use if you were on a terminal that
actually understood this character set. If you're using a
window system such as X11, you'll also need to be sure
that your terminal emulator is using the right font. Thus
if you have a font named "heb6x13", you can start a com-
patible xterm and mailto to send mixed English/Hebrew mail
using the command "xterm -fn heb6x13 -e mailto -a
iso-8859-8". In general, having an installed font with
the same name as the character set is a good idea, partic-
ularly if you're using shownonascii(1).
Once you've got mailto started up using the right charac-
ter sets, there are two ways to enter non-ASCII charac-
ters. The first, and by far the easiest, is to use the
keys as marked, if you're on a physical terminal that uses
one of these character sets. However, if you're using a
standard ASCII keyboard, as most X11 users do, you need
some other way to enter non-ASCII characters. To permit
this, mailto has an "eight bit mode". In eight bit mode,
all printable characters that you type have the eighth bit
turned on, thus turning them into non-ASCII characters.
You can enter eight bit mode using the tilde escape "~+",
and you can leave it using "~-". To see the mapping from
your keyboard to eight-bit-mode characters, just give the
command "~?+".
Finally, certain languages that can be expressed in the
ISO-8859 family, notably Hebrew and Arabic, go from right
to left rather than left to right. To ease the composi-
tion of text in these languages, mailto has a "right to
left" mode. This mode is toggled on or off using the "~^"
command. For added convenience, the right-to-left mode
and eight-bit-mode can be toggled on and off together
using a single command, "~S" (Semitic mode).
COMPLETE SUMMARY OF TILDE ESCAPES
For easy reference, here is a complete summary of the
tilde escapes in the mailto program:
~? Show help on tilde escapes
~! Shell escape
~~ Enter text line starting with a tilde
~. Send the mail and exit
~/ Set maximum size before message is split into
multiple parts
~?+ Show help on extended (eight-bit) characters
~> Indent Left Margin
~< Unindent Left Margin
~<R Indent Right Margin
~>R Unindent Right Margin
~+ Enter 8-bit mode for non-ASCII characters
~- Leave 8-bit mode (return to ASCII)
~^ Toggle
~* Add non-text data (pictures, sounds, etc.) as a new
MIME part (try it!)
~b Toggle bold mode
~c Add to CC list
~d Read from dead.letter (or named file, ~d filename)
~e Edit message being composed
~h Edit the headers
~i Toggle italic mode
~j Alter Justification (~jc = center, ~jl = flushleft,
~jr = flushright.)
~n Force newline (hard line break)
~p Print out the message so far
~q Quit, copying to dead.letter
~Q Toggle quotation (excerpt) mode
~r Read the named text file into the message
~s Reset the subject
~S Toggle Semitic mode (right-to-left AND eight-bit)
~t Add to To list
~u Toggle underline mode
~v Edit using VISUAL editor
~w Write message to named file
~z Add the contents of ~/.signature as a TEXT signa-
ture.
~Z Add the contents of ~/.SIGNATURE as a NON-TEXT
(MIME-format) signature.
SUMMARY OF MAILRC FUNCTIONALITY
The .mailrc file in your home directory is used to cus-
tomize the Berkeley mail program. The mailto program is
sensitive to some, though not all, of these customiza-
tions. In particular, you can use the .mailrc file to set
the following variables (via "set variablename" or "unset
variablename") that affect mailto's behavior:
askcc -- controls whether or not you are prompted for a
CC list.
dot -- controls whether or not a period alone on a line
should be interpreted as terminating your mail
ignore -- controls whether or not interrupts are
ignored
verbose -- controls the verbosity of output from
/usr/lib/sendmail
quiet -- controls the verbosity of output from the
mailto program.
keepblind -- controls whether or not a 'blind' copy of
the mail is kept.
commasonly -- controls whether or not a space character
is interpreted as separating mail addresses. By
default,
for compatibility with BSD mail, space is inter-
preted in this way,
but the commasonly option makes mailto behave more
like a modern
Internet mailer in this regard.
The other functionality implemented by the .mailrc file is
personal mail aliases. If you have a friend with a long
horrible mail address, you can put a line in your .mailrc
file that allows you to refer to him by a more friendly
name:
alias boygeorge George.Herbert.Walker.Bush%white-
house.uucp@nsf-relay.com
Mailto implements the alias feature in a manner that is
compatible with Berkeley mail. Moreover, it also knows
how to read ".AMS_aliases" files as used by CMU's Andrew
system, so that Andrew users do not need to maintain two
different alias files in order to use both Andrew and
mailto.
OTHER KNOWN DIFFERENCES FROM BERKELEY MAIL
Although this program was modelled on Berkeley mail, its
user interface is inevitably not identical with that pro-
gram. What follows is a list of major known differences,
beyond the multimedia enhancements, that might confuse
users accustomed to the Berkeley mail program:
Address separators: In Berkeley mail, addresses are sepa-
rated by spaces, which is an abomination to the mail gods.
For backward compatibility, this also works in mailto, but
right-thinking people may use commas instead.
Newline semantics: Unlike Berkeley mail, in mailto single
line breaks are generally regarded as "soft". This means
that your message may be filled and/or justified when it
is seen by the recipient. Explicit line breaks can be
added using the "~n" command. Multiple consecutive line
breaks typed by the user WILL have the desired effect.
Alternately, any line that starts with a space or tab
character will be preceded by a line break.
Inclusion of dead.letter files: The "~d" command is used
to include the contents of the file "dead.letter" in the
current message. Mailto's implementation of this feature
differs from Mail's in two ways: First, the message is
included as an encapsulated message rather than as plain
text. While this may sometimes be inconvenient, it allows
multimedia dead.letter files to be retrieved properly.
Second, the "~d" command in mailto can take an argument,
which is the name of a file to use instead of the default
"~/dead.letter".
Incompatibilities with Sun's version: Sun Microsystems
(and no doubt many other vendors with whom the author is
less familiar) have enhanced the Berkeley mail command in
several ways, a few of which are not compatible with
mailto. In particular, the "~b," "~i, and "~<" commands,
at least, are different in mailto than in Sun's version.
Potential for failure in ~p: In the standard Berkeley mail
program, it is inconceivable that "~p" would ever fail.
In mailto, ~p works by calling the metamail(1) program.
If metamail is not on the user's search path, ~p will not
work.
Extended alias searching: The mailto program reads both
the aliases in the .mailrc file, as does Berkeley mail,
and those in the .AMS_aliases file, as used by CMU's
Andrew Message System.
Altered editing behavior: The ~e and ~v commands, which
are used to edit the message being composed, will behave
differently in mailto if the mail includes non-text por-
tions. In such cases, each part will be edited sepa-
rately, in sequence, which makes it impossble for the user
to accidentally mess up the inter-part boundaries. More-
over, if the mailcap entry for a given data type includes
an "edit" field, the user will be given the choice of
editing with the program named there or editing with his
usual (text) editor. In most cases, this will be a choice
between using a structured editor or editing the raw data
stream.
Altered behavior for large messages: Mailto delivers your
message using the splitmail(1) program. This is done so
that large messages will be split into a set of smaller
parts in a MIME-compliant way, so that MIME readers can
automatically reassemble them upon receipt. By default
all messages over 100Kbytes are split, but this can be
controlled using the SPLITSIZE environment variable. See
the splitmail(1) man page for more information.
New -r command-line option The -r comand-line option is
not found in standard Berkeley mail.
SUMMARY OF OPTIONS
-a <charset> -- specifies an alternate character set in
use. This had better be the one your terminal is actually
using. Currently it must be in the iso-8859 character set
family.
-c name -- specifies a name for the CC field. If you want
to include multiple values, you'll need to quote the name,
as in -c "name1, name2, name3"
-r message-id -- specifies a message-id to be used in con-
structing an In-Reply-To header field.
-s subject -- specifies the subject for the mail. If it
includes spaces, it will need to be surrounded by double
quotes as well.
ENVIRONMENT VARIABLES
MAILCAPS
This variable can be used to override the default
path search for mailcap files.
PAGER If set, this variable overrides "more" as the name
of the program to run to paginate output from an
interpreter, when pagination has been requested.
MM_CHARSET
This variable can be used instead of the -a switch
to tell mailto that your terminal (or terminal
emulator) implements a character set other than
US-ASCII.
TERM This variable tells mailto what your terminal type
is. This is used in conjunction with the term-
cap(5) facility to figure out how to do bold char-
acters, reverse video, underlining, or other neat
stuff on your terminal.
EDITOR This variable names the editor mailto will use
when you ask (with ~e) to edit the message you are
composing.
VISUAL This variable names the visual editor mailto will
use when you ask (with ~v) to edit the message you
are composing.
SEE ALSO
metamail(1) mmencode(1) richtext(1) audiocompose(1)
getfilename(1) mailto-hebrew(1) splitmail(1)
shownonasci(1)
BUGS
Currently, fgets is used to get each line of input. An
intelligent replacement, in which the effects of right-to-
left mode, eight-bit-mode, and the margin- and justifica-
tion-related commands were immediately evident, would be a
big improvement.
Although this program was modelled on Berkeley mail, its
user interface is inevitably not identical with that pro-
gram. The section entitled "OTHER KNOWN DIFFERENCES FROM
BERKELEY MAIL," above, might be considered by some to be
an extension of this "BUGS" section.
COPYRIGHT
Copyright (c) 1992 Bell Communications Research, Inc.
(Bellcore)
Permission to use, copy, modify, and distribute this mate-
rial for any purpose and without fee is hereby granted,
provided that the above copyright notice and this permis-
sion notice appear in all copies, and that the name of
Bellcore not be used in advertising or publicity pertain-
ing to this material without the specific, prior written
permission of an authorized representative of Bellcore.
BELLCORE MAKES NO REPRESENTATIONS ABOUT THE ACCURACY OR
SUITABILITY OF THIS MATERIAL FOR ANY PURPOSE. IT IS PRO-
VIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES.
AUTHOR
Nathaniel S. Borenstein