AHA152X_CS(4)

NAME
       aha152x_cs  -  Adaptec  AHA-152X  compatible PCMCIA device
       driver

SYNOPSIS
       insmod   aha152x_cs.o   [pc_debug=n]    [irq_list=i,j,...]
       [host_id=n]   [reconnect=n]   [parity=n]   [synchronous=n]
       [reset_delay=n] [ext_trans=n]

DESCRIPTION
       aha152x_cs is the low-level Card Services driver for vari-
       ous  PCMCIA  SCSI  adapters  that  are compatible with the
       Adaptec AHA-152X host  adapter.   These  include  the  New
       Media Bus Toaster, the Adaptec AHA-1460, and various other
       OEM cards.

PARAMETERS
       pc_debug=n
              Selects the PCMCIA debugging level.  This parameter
              is  only  available  if the module is compiled with
              debugging enabled.  A non-zero value enables debug-
              ging.

       irq_list=i,j,...
              Specifies  the  set of interrupts that may be allo-
              cated by this driver.

       host_id=n
              Specifies the SCSI ID of  the  host  adapter.   The
              default host ID is 7.

       reconnect=n
              Enables  support  for disconnect/reconnect, if non-
              zero.  The default is 1 (true).

       parity=n
              Enables SCSI parity checking.   The  default  is  1
              (true).

       synchronous=n
              Enables  negotiation of synchronous SCSI transfers.
              The default is 0 (false).

       reset_delay=n
              Specifies a delay for SCSI bus resets, in  10  mil-
              lisecond intervals.  The default is 100.

       ext_trans=n
              Enables  the  ``extended  translation''  scheme for
              partition tables of drives larger than 1 GB.

AUTHOR
       David Hinds - dhinds@allegro.stanford.edu

SEE ALSO
       cardmgr(8) pcmcia(5).